Resinzwood Tabletop Resin for Tabletops, Bar tops, Benchtops, Artwork, Coasters, Jewelery. Our products are second to none as we use them daily right here at Resin Wood Tables NZ.

• Ratio A Resin to B Hardener is 2 parts A to 1 part B

• Pot Life is 20 minutes •

Working time is 40 mins •

Cure time is 6 to 8 hours at 22c sometimes a bit longer •

Production Date: All our products have a production date with an Expiry date of  12 – 15 Months for our Table Top resin.

METHOD 1. Pre-heat the container of resin by placing in a bucket with hot water for 5 to 10 mins

2. Exactly measure part A and B to ratio above

3. Firstly, pour part B into a mixing container then add the part A.

4. Mix for 5 mins in a clockwise then counter clockwise direction ensuring to scrape the sides of the container so the product is well blended. Always use a clean stick for mixing.

5. Let the resin stand for 5 to 10 mins for it to release air bubbles.

6. Once you pour Resinzwood Crystal Clear Tabletop resin any remaining air bubbles will disappear with the use of a Gas torch or heat gun. This can be done again after about 5 to 10 mins.

All Spec data sheet info can be found on our site in our How To section.

Note: 1. By adding Part B to the container, you are mixing in before Part A ensures that all molecules of the resin are coming into contact with the hardener. This eliminates the risk of having uncured resin in your project.

2. This product loves the heat so once you have done your pour having a higher room temp is a good thing to do.

3. Best to have some air movement in the room. Avoid having a fan blow directly over the resin but just circulating air in the room is a good practice.

4. We are Available via Email or on our Facebook Messenger or call Paul if you need help on 021966387. We are here to help you should you need it!

Thankyou for purchasing our products from Resin Wood Tables NZ Resinzwood Limited as you are actively keeping New Zealander’s employed.


A short sentence describing what someone will receive by subscribing