Resin Drips

How To Deal With Epoxy Resin Drips

Paul Resinzwood Paul Resinzwood
1 minute read

Listen to the blog
Audio generated by DropInBlog's Blog Voice AI™ may have slight pronunciation nuances. Learn more

How To Deal With Epoxy Resin Drips is not as hard as you may think it will be or appear to beResin table epoxy resin drips image when you do not know how to overcome them, this is a straightforward fix. First, after you have finished the base coat on the table's bottom side, proceed as follows in the video below. This is when we deal with the epoxy resin drips. I will do a much better-detailed video on this called Epoxy Resin Drips to show alternative ways of combating this problem.

  • Line around the outside edges with Green tape or Passionart Art tape
  • Proceed on to do your final flood coat on the topside of your table.
  • Once fully cured turn the table upside down and sand down to the tape.
  • That will indicate to you that you are at the original level of the base resin
  • Pull off the tape.
  • You will see the last remaining drips will come off with the tape.
  • Now polish the edges using Pledge or Rubio Mono-coat

Watch Video of how Paul takes care of those pesky drips.

« Back to Blog