Table of Contents
PassionArt Craft Resin 1:1 is made from the highest quality products with the highest amount of
UV additives that will outperform other one-to-one craft resins currently in the New Zealand marketplace. This produces a perfect resin that contains no VOCs, is Crystal Clear, and is Easy to use, making it ideal for all forms of resin art, table and board making, and jewellery crafting when using our moulds, pigments, and Inks. PassionArt Craft Resin 1:1 Starter kit has a working time of around 30 minutes, depending on the room temperature. The optimal temperature is 22 °C for the best results. Fully cured within twenty-four hours, but the longer you leave the piece you have crafted, the better it becomes as it hardens up to its optimal hardness of Shore 85D to 90D..
PassionArt Craft Resin
$80.00
$100.00
PassionArt Resin 1:1 by Volume. "With high UV resistance and crystal-clear transparency, PassionArt Craft Resin is the top choice for resin artists in New Zealand. We are committed to continually improving all our products, ensuring you have access to the most… read more
Resinzwood Top Ten Pro Tips Passionart 1:1
1: Store your Passionart 1:1 Art Craft resin in a cool to warm and dry environment out of direct sunlight. If you store the resin in a room that is too cold, it may crystallise in the bottle, which is not ideal. This can be resolved by heating the resin and hardener in a hot-water bath.
2: Before using your Passionart 1:1 Art Craft resin, ensure you heat the resin only in a water bath of hot water. Note that heating the hardener component may reduce your working time, so, as a rule of thumb, heating the resin only is advisable for beginners. I heat both Part A and Part B this way. Heating the resin before use makes mixing easier and helps release air bubbles before you use the product in your creative pieces.
3: Always put the Part B Hardener into your mixing container first to ensure that all of the Part A resin comes into contact with Part B. Failing to do this can have dire results, especially if you are like me and scrape every last bit out of the container. The issue is that scraping the raw resin from the outer sides of the mixing container will result in unset pieces in your creative work.
4: Ensure you mix your Passionart Craft resin by Scraping the sides of the container you are mixing your resin in to ensure that both part A and Part B are well mixed.
5: Maintaining an even and consistent room temperature of 20 °C to 23 °C is the best practice for the mixing and curing of your Passionart 1:1 resin. This principle applies to all of our resins. Most resins do not favour being exposed to inconsistent temperatures.
6: Try to keep your resin mixing and pouring in a dust-free environment. This can be hard to do at the best of times, no matter how cautious we think we are. At the very least, for smaller pieces, use a cake stand cover from most $2 shops. For larger projects, you can purchase fine netting for curtains or cake stands from your local Spotlight or Briscoes stores.
7: Air circulation in the room is another factor to consider. Ideally, but not vital, try to ensure that you have air movement in your working area, but never have a fan blowing directly over your crafted pieces
8: Never be tempted to handle your crafted pieces too soon. Although the recommended cure time is 24 hours, it is still soft at this point, and you can leave fingerprint impressions in most resins, regardless of brand. I like to err on the side of caution, even leaving my pieces for a further 24 hours to ensure the resin is fully cured.
9: Pro help and Support is at your fingertips, so if you feel the need to give someone a call, no matter if it is at 7 am or 11 pm, rest assured, you can call Paul on 021966387 for an over-the-phone or messenger video as he is here for you!
10: Remember that Resinzwood Resin Wood Tables NZ is your home of creativity, and our team is here for you, sourcing the best prices for the Highest Quality products so that you can get more creativity for your hard-earned dollar. With every order, we proudly give our Passionart Resinzwood customers/family Free products.
PassionArt Craft Resin Mixing Instructions
- Preheat bottles in a water bath for 10 mins to ensure the resin is fluid-like
- Calculate volume needed at resinzwood.com
- Pour part B into the mixing container first, then part A
- Mix well till all streaks have dissipated, about 4 minutes
- Put some resin in a smaller container to mix the colours
- Stand for a few mins for air release
- Pour into your project. Use a gas torch to pop bubbles
- Cover to protect from dust with room air circulation
- Cure time 24 hours at 20 – 23 °C
FAQs
Is Passionart Art Craft resin 1:1 mixed by Volume or Weight
Passionart Art Craft resin 1:1 is mixed by Volume
What is the working time of Passionart 1:1 Art Craft Resin
The working time of Passionart 1:1 Art Craft resin is around 30 to 40 mins pending on the room temperature
What is the Maximum pouring depth of Passionart 1:1 for small moulds
We have poured our Passionart 1:1 to a depth of 50mm with a volume of 250mls
Do you offer free lessons
Yes we offer free lessons at our workshop in Mangamuka Northland as well as in Christchurch and Palmerston North
What is the best way to clean resin off my skin
The best and safest way to clean resin off your skin is to use white vinegar then warm to hot soapy water. Never use acetone or thinners as this will enter your bloodstream
I have questions can I talk to a real person now
If you have questions you want answered simply call Paul on 021966387 between 7am - 11pm 7 days a week
MEDICAL SAFETY
If swallowed, never induce vomiting. Drink Water - Medical Help Contact with Eyes - Flush out with Water - Medical Help.
Skin Contact - Wipe off with White Vinegar, then warm to hot soapy water
Class 9 UN3082 PG111 resins / Class 8 UN2736 Hardeners
