As usual I’m very happy with my recent purchase of fluro green paste. It’s a nice consistency and the colour is fab !!
Amazing colour pastes
Thanks for supplying great products👌
Crekoat Resinzwood Limited UV001 TDS is a one-component UV-curable UV resin made of a modified acrylate with low viscosity and low odour, offering strong adhesion, fast positioning, and fast curing, with ageing resistance. UV001 is usually used for glass products as a colourless transparent resin for handicrafts, etc.
|
Appearance/color |
Translucent Liquid |
|
Viscosity |
3200±500mPa·s |
|
Tensile strength |
2:20mpa |
|
Shore D hardness |
2:86D |
|
Appearance/color |
Translucent Liquid |
|
Viscosity |
3200±500mPa·s |
|
Tensile strength |
2:20mpa |
|
Shore D hardness |
2:86D |
During operation, pour the product into the mould when the sun is not visible, place it for a while to defoam, and then use a UV lamp to illuminate it. When the mould thickness exceeds 2-3mm, it is recommended to select a type with a radian for the UV lamp for side lighting. The power should be higher, the time shorter, and the product surface smoother.
|
Hardness |
shoreD |
86 |
|
Flexural strength |
Kg/mm2 |
28 |
|
Heat Deflection |
·c |
so |
|
Water absorption |
% |
<0.1 |
|
Compressive strength |
Kg/mm2 |
8.4 |
|
|
|
© High performance, good stability, no self-curing phenomenon, and good yellowing resistance of the finished product (comparison of curing at the same
speed)
@ Easy to operate and clean.
@ Beautiful, no traces, suitable for transparent materials.
@ Widely used for bonding: various materials (such as glass decoration, glass coffee table, glass crystal, crystal craft, crystal chandelier, crystal trophy, crystal
words, etc.).
Storage
1. Store in a cool and dry place, sealed and protected from children.
2. Before use, please try a small amount first, master the use skills and techniques, and avoid mistakes.
3. The bonding surface must be kept clean and dry without water, dirt, oil stains, rust, etc.
4. The glue has a slight smell before curing. It is recommended to wear a mask and pay attention to ventilation during operation and construction. The smell will dissipate in the ventilated environment after the glue is solidified.
Statement
The information provided in this product manual is based solely on our understanding gained in the laboratory and in practice. Since the use of the product is usually outside our control, we only guarantee the product's quality. We are not responsible for any product construction quality problems caused by the use beyond the provisions of the manual. We reserve the right to modify the statements at any time.